The Complete DIY Guide to Tile and Grout Cleaning

Tile is among the best finishes that add aesthetic appeal to your home. On its downside, tile requires regular and intense cleaning to keep grime and dirt from accumulating. It requires a lot more hard work when it comes to keeping the grout clean.

Due to its porous nature and light coloring, grout tends to absorb spills and dirt, which makes it prone to stains. They can become permanent and hard to remove, making the tile lose its curb appeal. Before it gets there, its only fair that you make it a habit to clean your tile and grout frequently.

Here is a guide on how to do so without breaking a sweat or spending money on expensive cleaning products.  If you want your tile and grout floors cleaned by experts, click here.

 

How to Clean Bathroom Tiles

Cleaning a bathroom tile and grout may require a lot more effort than other surfaces. This is because they are prone to the accumulation of mold and bacteria. Pinkish hue on the grout of bathroom tiles is an indication of pink mold caused by bacteria. It thrives in damp and dark places and could be a source of respiratory problems for some people.

Make it a habit to clean your bathroom tile and grout in the following way.

  1. Use a bathroom cleaner to scrub the tiles to get rid of the first layer of grime.
  2. Soak the tiles in your preferred tile-cleaning solution for about 10 minutes. Ensure you apply a generous amount of the cleaning solution to the areas with the most substantial build-up of grime. You must avoid using bleach as it could destroy the grout.
  3. Scrub the tiles and grout using a sponge and switch to a toothbrush for more effective cleaning on the grout. If there are still stubborn stains, reapply your cleaning solution and scrub again.
  4. Rinse the tiles and grout with hot water. This helps in removing any remaining grime and the excess cleaning solution.
  5. Dry the tiles and grout as much as possible. Leaving them wet only allows more mold to grow.

How to Clean Tile Floors

Dirt quickly accumulates on tile floors, especially where there is heavy traffic. It’s highly unlikely that you’ll find mold on floor tiles, but spills and mud are likely to stain the grout. You can keep the grout well maintained by doing the following.

  1. Sweep or vacuum the loose dirt, dust, and debris from the floor.
  2. Starting with the most heavily stained grout area, use a floor cleaner or scouring product to loosen the dirt. However, pay attention to the type of tiles as they may be prone to scratches. Use a cleaning cloth to scrub off stains from mud or spills.
  3. Use an old toothbrush to scrub the grout with the help of products specifically made for grout-cleaning.
  4. Mop the floor using a tile cleaning product. Mopping helps take care of the remaining stains on the tiles. Change the cleaning water as many times as necessary to avoid spreading dirt around.

 

Once you’re done cleaning as in the above steps, leave the grout to air dry for 24 hours. Afterward, apply some silicone-based grout sealer. It helps keep stains, grime, and dirt away. Reapply the sealer every two years or as frequently as possible, especially where the grout is exposed to high traffic.

 

Products You Can Use to Clean Tile and Grout

For the best results in tile and grout cleaning, you can add these products to your cleaning water.

Vinegar

Spray equal parts of vinegar and warm water on your tile and grout for several minutes. Leave it for about ten minutes then scrub with a stiff scrubbing brush.

Baking Soda Paste

Cover the grout lines with a thick paste of baking soda and spray some vinegar solution on it. Once the foaming stops, scrub with a stiff brush and rinse off with plain water.

Hydrogen Peroxide

Some tough stains may call or the use of hydrogen peroxide, which you can obtain easily from most drug stores. You can use the peroxide alone or make some baking soda paste and spray the peroxide on it.

Oxygen Bleach

For adamant stains and grimy grout, oxygen bleach can come in handy. It comes in powder form and must be used in well-ventilated areas. Make a solution out of it and leave it to stand on the tiles and grout for about 15 minutes before rinsing it off. Always use clean water to avoid leaving streaks of dirt in the grout lines.

 

Take Away

Taking care of your tiles and grout shouldn’t be hard work if you know what to do. Don’t wait until dirt and grime accumulate to get to work. Regularly cleaning with products like vinegar or baking soda paste will go a long way in maintaining your grout in good condition.  If you want to professional to clean even the dirtiest of stains, we highly recommend this company.

Leave a Reply

shares